Below you will find various pictures by myself, Lee Marsh.
|
| GWR Duke class, Isle of Guernsey built and painted by Lee, lined and lettered by A.Brackenborough |
|
| GWR Pannier tank with working inside motion from a Finney kit |
|
| LMS Jubilee from a DJH kit. |
|
| GCR 107 from a Gladiator kit |
|
| GWR Trojan from an Agenoria kit, with scratch built rods and saddle tank |
|
| GWR 551 from a Mitchell Design kit |
|
| GWR 517 class No.551 from a Mitchell Design kit |
|
| GWR 517 class 1430 from a Mitchell Design kit |
|
| GER/LNER N7 69687 from a Connoisseur kit in scale 7 |
|
| GWR Red Star from a Mitchell Design Kit with a scratch built boiler/firebox/smokebox |
|
| GWR Red Star from a Mitchell Design Kit with a scratch built boiler/firebox/smokebox |
|
| GWR Aberdare 2673 from a Martin Finney kit with working inside motion |
|
| N7 69687 again with scratch build chassis and Westinghouse pump, weathered by Martyn Welch |
|
| GWR 2811 from a Martin Finney kit with working inside valve motion |
|
| GWR Stella 3510 from a Martin Finney kit with working inside motion |
|
| GWR Stella 3510 from a Martin Finney kit with working inside motion |
|
| GWR 1367 from an Underhill kit |
|
| GWR Deans goods from a Martin Finney kit |
|
| Yours truly, fireman Marsh! on C.R. 0-4-4T 419 with my driver & good mate Alex Naismith. This loco has no insulation on the backplate and a very small cab, so it gets a little warm in that cab during the summer!! |
|
| Example of the lost wax cast iron wheels by Alan G Harris that I use on my models. Alan's details can be found on the links page. |
|
| GWR 4-4-0 wheel set by Alan with steel crank axle. |